Astrobe Forum

Posted: **Sun Mar 17, 2024 11:39 am**

Test code (Astrobe v9.1 for Cortex-M0):

MODULE M;

  PROCEDURE p(s: SET);
  END p;

  PROCEDURE run;
    VAR k: INTEGER;
  BEGIN
    p({k});
    p({13})
  END run;

END M.

Partial assembly code:

Code: Select all

  PROCEDURE run;
    VAR k: INTEGER;
  BEGIN
.    12     0CH  0B500H          push     { lr }
.    14     0EH  0B081H          sub      sp,#4
    p({k});
.    16    010H  09800H          ldr      r0,[sp]
.    18    012H  02101H          movs     r1,#1
.    20    014H  04081H          lsls     r1,r0
.    22    016H  0F7FFFFF5H      bl.w     -22 -> 4
.    26    01AH  0E000H          b        0 -> 30
.    28  <LineNo: 8>
    p({13})
.    30    01EH  02001H          movs     r0,#1
.    32    020H  00340H          lsls     r0,r0,#13
  END run;
.    34    022H  0F7FFFFEFH      bl.w     -34 -> 4
.    38    026H  0E000H          b        0 -> 42
.    40  <LineNo: 10>
.    42    02AH  0B001H          add      sp,#4
.    44    02CH  0BD00H          pop      { pc }
.    46    02EH  046C0H          nop

For the first call of 'p', parameter 's' is passed in register R1 in lieu of R0.

The immediate version works (second call of 'p').

Posted: **Tue Mar 19, 2024 2:02 am**

Thank you for your report. The problem will be fixed in v9.2. In the meantime a workaround is to assign the set to a local variable before passing it as a parameter. See the attached test program which should display the string "OK".

Replacing the local variable assignment

Code: Select all

s := {k};
Check(s, k)

with

Code: Select all

Check({k}, k)

should result in an exception until the problem is fixed.

Astrobe Forum

SET Parameter Problem

SET Parameter Problem

Re: SET Parameter Problem