The attached example demonstrates how to use v7.0 Astrobe for RISC5 to write applications that display text on a 1.8" 128 x 160 TFT screen using a Sitronix ST7735 Display Controller. It uses a 6x8 font stored in a file Font.res which you need to upload to your target board with the compiled source code files.
The command used to run the demonstration module is TextDisplay.Run
The screen we used is the AdaFruit 1.8" Colour TFT Shield (PID: 802) which conveniently plugs into the Arduino-compatible headers on the Digilent Arty A7 and S7 boards.
Display Text on a 1.8" 128 x 160 Colour TFT screen
-
- Site Admin
- Posts: 511
- Joined: Fri Dec 31, 2010 12:30 pm
- Contact:
Display Text on a 1.8" 128 x 160 Colour TFT screen
- Attachments
-
- TextDisplay.zip
- (6.64 KiB) Downloaded 2786 times