Search found 7 matches
- Wed Mar 15, 2023 3:22 am
- Forum: Cortex-M0, M3, M4 and M7
- Topic: Astrobe V8.1.1 targeting Raspberry Pi RP2040
- Replies: 1
- Views: 86419
Astrobe V8.1.1 targeting Raspberry Pi RP2040
I'm asking for advice in order to program in Oberon and generate ARM Thumb instruction set code with the new Astrobe 8.1.1 for Raspberry Pi RP2040. I'm using the Personal Free Edition, are there more target CPUs in the Configuration of the Astrobe Professional version? Or do I need to Edit one of th...
- Mon May 31, 2021 3:46 pm
- Forum: Astrobe for FPGA RISC5
- Topic: Project Oberon Workstation on Digilent Nexys 4 Rev B
- Replies: 6
- Views: 17454
Re: Project Oberon Workstation on Digilent Nexys 4 Rev B
I don't know right now, I need to retest the generation of the bitstream. But as long as I remember I configured FPGA once and showed to students many times until one day (after a couple of years) it fails like I mention with a gray pattern on screen. Then I certainly tried to reconfigure and reburn...
- Sun May 30, 2021 4:03 pm
- Forum: Astrobe for FPGA RISC5
- Topic: Project Oberon Workstation on Digilent Nexys 4 Rev B
- Replies: 6
- Views: 17454
Re: Project Oberon Workstation on Digilent Nexys 4 Rev B
Solved! The problem is solved by adding and mapping prom.mem correctly in Vivado, in a parent directory as showed in PROM.v with: initial $readmemh("../prom.mem", mem); I tried to relocate several times, but Vivado always failed to find the file, despite modifying the path in the Verilog readmemh fu...
- Sun May 30, 2021 2:39 pm
- Forum: Astrobe for FPGA RISC5
- Topic: Project Oberon Workstation on Digilent Nexys 4 Rev B
- Replies: 6
- Views: 17454
Re: Project Oberon Workstation on Digilent Nexys 4 Rev B
No LED is on, or blink or nothing. The only LEDs on are DONE and just an instant BUSY after PROG is pushed. After CPU_RST pressed, there is no change. I'm baffled.
On the same board I could start Embedded Oberon without problem but not PO WS.
On the same board I could start Embedded Oberon without problem but not PO WS.
- Fri May 28, 2021 6:21 pm
- Forum: Astrobe for FPGA RISC5
- Topic: Project Oberon Workstation on Digilent Nexys 4 Rev B
- Replies: 6
- Views: 17454
Project Oberon Workstation on Digilent Nexys 4 Rev B
I'm trying to map the Project Oberon Workstation on the Nexys4 Rev B with the provided XDC file by email to me by you. After generating the MCS file, configuring the QSPI FlashROM on the board, and burning 4GB micro SD card with the image provided, connecting keyboard and VGA monitor, putting Jumper...
- Thu May 27, 2021 4:54 pm
- Forum: Astrobe for FPGA RISC5
- Topic: Mapping to Nexys4 Cell RAM board
- Replies: 3
- Views: 14105
Re: Mapping to Nexys4 Cell RAM board
Thank you for your guide and advises. I have Embedded Oberon already running in the Nexys4 Cell RAM board. Just for the sake of completeness: Between the step 4 and 5 there are more ministeps not evident for me: 4.1 Choose Format: MCS 4.2 Choose Memory Part: s25fl128sxxxxxx0-spi 4.3 Choose a Filenam...
- Thu May 27, 2021 6:41 am
- Forum: Astrobe for FPGA RISC5
- Topic: Mapping to Nexys4 Cell RAM board
- Replies: 3
- Views: 14105
Mapping to Nexys4 Cell RAM board
For Astrobe v7.2 for RISC5 I've been trying this XDC configuration, attached.
I did not have success communicating to Astrobe after configuring the FPGA in the board.
I need some help also to generate the ROM file; I'm only trying by USB JTAG with PROG UART connector.
I did not have success communicating to Astrobe after configuring the FPGA in the board.
I need some help also to generate the ROM file; I'm only trying by USB JTAG with PROG UART connector.